MIL-HDBK-1191
16.2.5
E-
Government furnished and Contractor installed from Military
Construction Appropriation funds (MILCON). Delay procurement until the
latest date feasible that shall not interfere with project completion to
acquire the latest technology.
16.2.6
F-
Government furnished and government (vendor) installed from
Military Construction Appropriation funds (MILCON). Delay procurement until
the latest date feasible that shall not interfere with project completion to
acquire the latest technology.
16.2.7
G-
Government furnished and government installed from other
than MILCON funds through special justification, authorization and funding.
Examples of category G equipment or equipment systems are Composite
Healthcare (computer) Systems (CHCS) implementation and so forth.
16.2.8
R-
Existing government owned equipment that will be relocated
and reused. Cost of relocation, if incurred, will be from funds as
determined by the using Military Department and other than MILCON.
16.3
Design. Develop equipment plans as a building system integrated
with architectural, structural, mechanical, and electrical systems.
Equipment shall be arranged and organized so as to provide adequate
circulation, workflow, and maintenance clearances.
16.3.1
Layout and Clearances. Arrange equipment to provide service
clearances and maintenance access with minimum disruption to work spaces.
When expansion is anticipated in a project, allow for the addition of
equipment without disruption or reconfiguration of workflow in the layout of
sterilizing and sanitizing equipment spaces or any other spaces affected by
the addition.
16.3.2
Recessed Equipment. Surgical storage consoles, wall-mounted
panels, and accessories in operating rooms shall be flush mounted and of the
wall-recessed or through-wall types, for aseptic control.
16.3.3
Casework. All built-in casework shall be fabricated and
designated in accordance with Military Specification MIL-C-20709 (reference
16b). All other casework shall be designated, specified, and installed in
accordance with MIL-C-29240 (reference 16c), MIL-M-29241 (reference 16d), and
other specifications as directed by the Design Agent.
16.3.3.1
Provide corrosion resistant steel (CRS) or other nonporous,
seamless joint casework in the following areas: operating and delivery rooms;
their sub-sterile and cleanup areas; laboratory (as required by the Military
Department); central sterile supply decontamination and clean-up areas; and
autopsy and its associated clean-up areas.
16.3.3.2
Movable, modular ("systems") casework systems may be used in
projects deemed appropriate by the using Military Department.
16.4
Special Requirements. Special equipment and system planning and
utility requirements are incorporated into other technical Sections.
16.5
Food Service Equipment.
16.5.1
Design, construct, and install all serving line and food
preparation equipment according to the highest industry standards. Provide
16-2
Previous Page
