MIL-HDBK-1138
REFERENCES
NOTE: THE FOLLOWING REFERENCED DOCUMENTS FORM A PART OF THIS
HANDBOOK TO THE EXTENT SPECIFIED HEREIN. USERS OF THIS HANDBOOK
SHOULD REFER TO THE LATEST REVISIONS OF CITED DOCUMENTS UNLESS
OTHERWISE DIRECTED.
FEDERAL/MILITARY SPECIFICATIONS, STANDARDS, BULLETINS, HANDBOOKS,
AND NAVFAC GUIDE SPECIFICATIONS:
Unless otherwise indicated, copies are available from the Naval
Publishing and Printing Service Office (NPPSO), Standardization
Document Order Desk, Building 4D, 700 Robbins Avenue,
Philadelphia, PA 19111-5094.
MIL-HDBK-1004/10
Electrical Engineering Cathodic
Protection
MIL-HDBK-1005/9
Industrial and Oily Wastewater
Control
MIL-HDBK-1110
Paints and Protective Coatings for
Facilities
MIL-HDBK-1136
Cathodic Protection Operations and
Maintenance
MIL-HDBK-353
Planning and Commissioning of
Wastewater Treatment Plants
ETL 1110-3-466
Selection of Design of Oil and
Water Separators (Department of
Army, U.S. Army Corps of Engineers,
Washington, D.C. 20314-1000)
OTHER GOVERNMENT DOCUMENTS AND PUBLICATIONS:
EPA/625/R-92/013
Environmental Regulations and
Technology: Control of Pathogens
and Vector Attraction in Sewage
Sludge (Including Domestic
Septage) Under 40 CFR Part 503
EPA-625/6-84-009
Septage Treatment and Disposal
Handbook (Cincinnati, Ohio: U.S.
Environmental Protection Agency,
October 1984)
121
Previous Page
