EXISTING SITE CONDITIONS

UFC 3-260-11FA

25 May 2005

1.7.3.3

Design Phase Safety

The Contractor shall submit airfield

access requirements of

design personnel at the Pre-Design

Conference. The safety

requirements and procedures for design

personnel access to the

project site will be established at the

Pre-Design Conference. It

is the Contractor's responsibility

to ensure that design

personnel

are

familiar

with

and

follow

airfield

safety

procedures.

1.7.3.4

Operational Safety Plan

The Contractor shall prepare an operational safety plan that

addresses the requirements and safety considerations of Sections

A15.5 and A15.6 in Attachment 15 of UFC 3-260-01.

The plan shall address operational safety during each project

phase and subphase identified in the Phasing Plan. The

operational safety plan shall be submitted with the first design

submittal.

1.8

EXISTING SITE CONDITIONS

1.8.1

Site Inspection

The Contractor is responsible for making the necessary site

visits during the Proposal and Design phases to assess existing

conditions and to obtain all detailed information that is

required to develop a Proposal and Design.

1.8.2

Surveys

State those surveys that are the responsibility of

the D-B Contractor and include the Government

Criteria for the surveys and reporting of survey

results. Also, list or describe any surveys that

are Government furnished. The criteria for all

surveys should be included as an appendix or edit

accordingly.

1.8.2.1

Contractor-Furnished

The Contractor shall prepare [topographic surveys], [obstruction

surveys], [geotechnical surveys], [pavement evaluation surveys].

The results of all surveys shall be included in the Contractor-

furnished Design Analysis and be included in the first design

submittal. The criteria for all Contractor-furnished surveys are

included herein as an appendix.

All site investigations by the Contractor shall be coordinated

with the Base Civil Engineer or Department of Public Works. The

exact location of any geotechnical excavation, whether by

drilling or digging, shall be approved by the appropriate

01016 - 4