UFC 3-600-01
17 April 2003
with change 16 January 2004
1-5
DESIGN ANALYSIS. A fire protection design analysis is required
for all designs and must address the fire protection requirements of the project as
required by this UFC. Summarize the fire protection design analysis and submit
with the first design submission separate from other disciplines. Where
applicable, discuss the following minimum fire protection provisions (include
required vs. provided):
Building code analysis (i.e., type of construction, height and area
limitations, and building separation or exposure protection)
Classification of occupancy,
Specific compliance with UCF 3-600-01 and National Fire Codes,
Requirements for fire-rated walls, fire-rated doors, fire dampers
with their fire-resistive ratings, smoke compartmentation, smoke
barriers
NFPA 101, Life Safety Code
Analysis of automatic suppression systems and protected areas,
Water supplies,
Smoke control systems,
Fire alarm system (the type of alarm system and location of the fire
alarm equipment and fire zones),
Fire detection system (the type of detection system and location of
detectors and fire zones),
Standpipe systems and fire extinguishers,
Interior finish ratings,
Connection to and description of base fire alarm reporting system.
Identify the various occupancies and hazardous areas associated
with the facility.
Coordination with security and AT/FP requirements.
Fire Department access.
6
Previous Page
