MIL-HDBK-1027/4A
Mechanical Room. This space normally contains the facility related
sprinkler valves and piping. Area requirement for facility HVAC equipment is
typically 5 percent of gross floor space; however, the requirement can vary
depending on space criteria and other factors such as use of a basewide steam
system. Mechanical rooms typically contain a variety of equipment types
which must be accommodated early in the design. Avoid locating rooms with
HVAC equipment on upper levels where sound can reverberate through structural
systems. Provide adequate access space around equipment for operation,
maintenance, and servicing. Locate hydraulic and pneumatic equipment which
support the trainer devices in a separate pump room due to air contaminants,
noise, and safety considerations.
Medical Treatment Room. Provide cabinets and hospital type sink in
counter with gooseneck faucet and sprayer.
Night Vision Trainer Room. The scale model trainer is located here
along with a 20 feet eye lane. Lightproofing is required.
Officer in Charge (OIC) Office. This office accommodates the
person responsible for controlling the use of the facility, scheduling the
use of classrooms and training devices and maintaining curriculum. Visual
access to the administrative area is desirable with privacy blinds. See
collateral equipment list for furnishings.
Outside Equipment Storage. Provide space for lawn maintenance
equipment where required and flammable storage lockers.
Oxygen Storage Room.
Provide appropriate racks for approximately
18 oxygen bottles.
Rear Projection Room. Provide if desired by the model manager.
Locate between classrooms where possible to conserve space.
Staff/Student Lounge. Provide a minimum 7 feet wide base counter
and cabinet with double sink and wall cabinets over.
Staff Office. Provide administrative type space.
See collateral
equipment list for furnishings.
Storage. Dry storage and a refrigerator are located in this space.
See the collateral equipment list.
Student Lounge.
Toilets. Specify ceiling hung partitions for easier cleaning and
drainage to eliminate rusting of floor mounts. Provide solid plastic
partition finish for better hygiene and graffiti resistance. Provide
convenient shelf for temporary stowage of hand carried items, such as hats
and books.
Trainer Room. Allow stowage space for moveable service platforms.
Set critical ceiling heights based on highest excursion limit of equipment,
portable crane operating heights, and area of service expected for both
current and future devices.
122