MIL-HDBK-1027/4A
Table 4.2
TRAINER FACILITIES DATA-Rapid Decompression Chamber-device 9A1C
Room dimensions shown are minimums unless noted.
** CAUTION: This document is for preliminary planning only.**
**Verify with Facilities Management & MILCON Div., Naval Healthcare Support
Office prior to use. **
REFERENCE DOCUMENTS
Technical Manual NAVTRADEV P-4463 revision A, Altitude Training Rapid
decompression Chamber, Device 9A1C.
ARCHITECTURAL
MIN DIMENSIONS
(LWH or noted)
Device Operating Room--(High Bay)
225.5"x 127"x 101.6"
panel 1
General Notes: Above requirements are Trainer Device specific.
See other data
for administrative & support spaces.
STRUCTURAL
Device installation transport method: casters
Device panel 1 operating weight = 5790 pounds, shipping weight = 6255 pounds.
Floor load for panel 1 in operating configuration with jack pads = 14.0 psi
Device panel 2 operating weight = 1295 pounds, shipping weight = 1635 pounds.
Floor load for panel 2 in operating configuration with jack pads = 6.5 psi
Device panel 3 operating weight = 565 pounds, shipping weight = 565 pounds.
Floor load for panel 3 in operating configuration with casters = 400 psi
140
Previous Page
