ARCHITECTURAL
1.
For guidance in the selection of Plan Types A or B, see paragraph
3 on page 28.4-34.
2.
Provide exterior design and siting to suit project requirements.
3.
The shop sizes indicated are for a typical automotive (Lead Acid)
and/or aircraft (NICAD) with a maximum workload of 8 nickel
cadmium and 40 lead acid batteries per work shift. For work loads
different than this, the shop size should be modified. The major
change for different work loads would be in the charging bench
requirements.
4.
Battery Shop Facilities and Battery Rooms shall comply with OSHA
1926.403 and 1910.178.
TOTAL GROSS AREA
Plan
Type
A
Facility
1,206 S.F.
Plan
Type
B
Facility
1,400 S.F.
MECHANICAL - Plan Types A and B
Plumbing:
Cold Water
15 GPM
Hot Water
Recovery Rate (through 65 rise)
20 GPH
Storage
50 Gallons
Maximum Temperature
105F
Outside design temperature:
Refer to NAVFAC P-89 "Engineering Weather
Data".
Typical design load in MBH at various outside design temperatures.
-5F
+5
+15F
+25F
32
28
23
19
Inside design temperature:
68F minimum for NICAD Shop
68F maximum for Lead Acid Shop and Office
TITLE
BATTERY SHOP
DATE
FACILITY PLATE NO.
SHEET
UTILITY REQUIREMENTS
SEPT84
218-50
6
Previous Page
