UFC 3-570-06
JANUARY 31 2003
APPENDIX A PART 4
INSTRUCTIONS FOR COMPLETING AIR FORCE FORM 1687
FILL IN THE BLOCKS WITH THE FOLLOWING INFORMATION (block
headings are in bold lettering):
REPORT CONTROL SYMBOL:
Not Applicable (N/A).
INSTALLATION: Enter the official name and location of the
installation such as, "Fairchild AFB, WA." DO NOT USE
DESIGNATIONS OR ABBREVIATIONS SUCH AS, "FAFB."
FACILITY NUMBER: Enter the number of the facility, such as
"Building 1376"or "Water Tank 904."
AREA/SPECIFIC LOCATION: Enter the area, such as "North side of
building 1376, 50' west of the fire hydrant."
DRAWING NUMBER: Show drawing number of the map upon which this
leak is located for the purpose of recording installation leak
history.
FLUID TRANSPORTED OR STORED: Mark (x) in the block for the type
of fluid or fill in the other (specify) block with the
appropriate name of the fluid.
AVERAGE TEMPERATURE OF FLUID:
Enter the average temperature in
degrees Fahrenheit.
DATE: Enter the date of the structure (i.e., pipe, valve or
tank) installation.
DESIGN LIFE:
Enter the number of years (life expectancy)of the
structure.
TYPE AND LOCATION OF STORAGE FACILITY OR TRANSPORT: Mark (x) in
the appropriate block or fill in the other (specify) block for
those not listed.
DATE LEAK/FAILURE DISCOVERED: Enter the appropriate date, day,
month and year such as, "1 Feb 98."
SIZE/DIAMETER: Enter the size of the storage facility or
transport such as, 6" or 500 gallon capacity.
LINE OR TANK DEPTH:
Enter the depth of the corroded structure.
A-22
Previous Page
