UFC 3-270-03
15 March 2001
1.3.2. Headquarters, Departments of the Army and Air Force. (1989). "Procedures for U.S.
Army and U.S. Air Force Airfield Pavement Condition Surveys," TM 5-826-6/AFM93-5,
Washington, DC.
1.3.3. Department of the Navy, Naval Facilities Engineering Command. (1995). "Resealing of
Joints in Rigid Pavement," Guide Specification NFGS-02982, Norfolk, Virginia.
1.3.4. Air Force Civil Engineer Support Agency. (1994). "Silicone Joint Sealants for
Pavements," Engineering Technical Letter ETL 94-9, Tyndall Air Force Base, Florida.
1.3.5. Headquarters, Department of the Army. (1991). "Field Molded Sealants for Sealing Joints
in Rigid Pavements," Guide Specification for Military Construction CEGS-02760, Washington,
DC.
1.3.6. Headquarters, Departments of the Army and Air Force. (1989). "Repair of Rigid
Pavements Using Epoxy- Resin Grouts, Mortars, and Concrete," TM 5-822-9/AFM 88-6,
/Chapter 10, Washington, DC.
1.3.7. Evans, L. D., and Romine, A. R. (1993). "Materials and Procedures for the Rapid Repair
of Joint Seals in Concrete Pavements," SHRP-H-349, Strategic Highway Research Program,
Transportation Research Board, Washington, DC.
1.3.8. Air Force Civil Engineer Support Agency. "Concrete Joint and Crack Repair," Tyndall Air
Force Base, Florida.
1.3.9. Air Force Civil Engineer Support Agency. "Concrete Repair Field Manual," Tyndall Air
Force Base, Florida.
1.3.10. Department of the Navy, Naval Facilities Engineering Command. (1995). "Patching of
Rigid Pavement Partial Depth," Guide Specification NFGS-02983, Norfolk, Virginia.
2
Previous Page
