ACKNOWLEDGMENTS
Figure or Table
Acknowledgments
Table 4,
Terzaghi, K., and Peck, R.B., Soil Mechanics in
Chapter 1
Engineneering Practice, John Wiley & Sons, New York, 1967.
Figure 3,
Broch, E., and Franklin, J.A., The Point Load Strength
Chapter 1
Test, International Journal of Rock Mechanics and Mineral
Sciences, Pergamon Press, 1972.
Table 6,
Hough, B.K., Basic Soils Engineering, Ronald Press, New
Chapter 1
York, 1969.
Figure 10,
Acker Soil Sampling Catalog, Acker Drill Company,
Chapter 2
Scranton, PA.
Figure 14,
Mehta, M.R., and Veletsos, A.S., Stresses and Displacement
Chapter 4
in Layered Systems, Structural Research Series No. 178,
University of Illinois, Urbana, IL.
Figures 18(a),
Watkins, R.K., Buried Structures, Foundation Engineering
20, and 21,
Handbook, Winterkorn, H.F. and Fang, H.Y., ed., Chapter
Chapter 4
27, Van Nostrand Reinhold Company, New York, 1975.
Figure 18(c),
Soft Ground Tunneling, (Company Brochure T-1), Commercial
Chapter 4
Shearing, Inc., Youngstown, OH., 1971.
Figure 18(e),
Concrete Pipe Design Manual, American Concrete Pipe
Chapter 4
Association, Vienna, VA., 1980.
Table 1,
Proctor, R.V., and White, T.L., Rock Tunneling with Steel
Chapter 4
Supports, Commercial Shearing, Inc., Youngstown, OH.,
1977.
Figure 23 and
Proctor, R.V., and White, T.L., Earth Tunneling with Steel
Table 2,
Supports, Commercial Shearing, Inc., Youngstown, OH.,
Chapter 4
1977.
Figure 1,
Lambe, T.W., and Whitman, R.V., Soil Mechanics, John Wiley
Chapter 7
& Sons, Inc., New York, 1969.
Figures 2 and
Janbu, N., Stability Analysis of Slopes with Dimensionless
3, Chapter 7
Parameters, Harvard Soil Mechanics Series No. 46, Harvard
University, Cambridge, MA.
xv
Change 1, September 1986
Previous Page
