REFERENCES
1.
Departments of the Army and Air Force, Soils and Geology, Procedures
for Foundation Design of Buildings and Other Structures (Except
Hydraulic Structures), TM 5-818-1/AFM 88-3, Chapter 7, Washington, DC,
1979.
2.
Mitchell, J. K. and Lunne, T. A., Cone Resistance as Measure of Sand
Strength, Journal of the Geotechnical Engineering Division, ASCE, Vol.
104, No. GT7, 1978.
3.
Terzaghi, K., and Peck, R. B., Soil Mechanics in Engineering Practice,
John Wiley & Sons, Inc., New York, 1967.
4.
Ayers J., and Plum, R., Unpublished work.
5.
Hough, B. K., Basic Soils Engineering, Ronald Press, New York, 1969.
6.
ISRM Working Party, Suggested Methods of the Description of Rock
Masses Joints and Discontinuities, International Society of Rock
Mechanics Second Draft of Working Party, Lisbon, 1975.
7.
Geological Society of America, Rock Color Chart.
8.
Coon, J. H. and Merritt, A. H., Predicting Insitu Modulus of
Deformation Using Rock Quality Indexes, Determination of the Insitu
Modulus of Deformation of Rock, STP 457, ASTM 1970.
9.
Deere, D. U., Hendron A. J. Jr., Patton, F. D. and Cording, E. J.,
Design of Surface and Near Surface Construction in Rock, Proceedings,
Eighth Symposium on Rock Mechanics, MN., 1966.
10.
Broch, E. and Franklin, J. A., The Point Load Strength Test,
International Journal of Rock Mechanics and Mining Science, Pergamon
Press, Vol. 9, pp 669 - 697, 1972.
11.
DiAndrea, D. V., Fischer, R. L., and Fogelson, D. E., Prediction of
Compressive Strength from Other Rock Properties, U. S. Bureau of Mines,
Report Investigation 6702, p 23, 1967.
12.
Franklin, J. A., Broch, E., and Walton, G., Logging Mechanical
Character of Rock, Transactions, Institution of Mining and Metallurgy,
A 80, A1-A9, 1971.
13.
Underwood, L. B., Classification and Identification of Shales, Journal
of Soil Mechanics and Foundation Division, ASCE, Vol. 93, No. SM6,
1962.
14.
Deere, D. U. and Patton, F. D., Slope Stability in Residual Soils,
Proceedings of the Fourth Panamerican Conference on Soil Mechanics and
Foundation Engineering, San Juan, Volume 1, pp 87-100, 1971.
Deere, D. U., Geologic Considerations, Rock Mechanics in Engineering
15.
Practice, Stagg, K. G. and Zienkiewics, O. C., ed., John Wiley and
Sons, New York, Chapter 1, 1969.
7.1-45
Change 1, September 1986
Previous Page
