MIL-HDBK-1164
Section 11: GENERAL MAINTENANCE
11.
11.1
Scope of This Section. This section deals with maintenance inspections
and general maintenance services required at military water supply systems that are
not addressed elsewhere in the handbook. In addition, this section contains tables
specifying tools and equipment, lubricants, and materials and supplies required to
perform general and specific equipment maintenance tasks.
11.2
References. Several publications are referred to in this section as
including necessary or supplementary maintenance information. These publications
are listed below, along with the paragraph number corresponding to the publication's
listing in Section 2, Applicable Documents. For brevity, subsequent references to each
document within Section 11 use the Section 2 paragraph number alone.
a)
Distribution System Maintenance Techniques (par. 2.2.41)
b)
Manual of Water Supply Practices: Electrodialysis and
Electrodialysis Reversal (par. 2.2.27)
c)
Manual of Water Supply Practices: External Corrosion--
Introduction to Chemistry and Control (par. 2.2.19)
d)
Manual of Water Supply Practices: Reverse Osmosis and
Nanofiltration (par. 2.2.28)
e)
MIL-HDBK-1110, Paints and Protective Coatings (par. 2.4.4.1)
f)
MIL-HDBK-1136, Cathodic Protection Operation and Maintenance
(par. 2.4.4.2)
g)
NACE RPO169-92, Control of External Corrosion on Underground
or Submerged Metallic Piping Systems (par. 2.3.18)
h)
NACE RPO196-96, Galvanic Anode Cathodic Protection of Internal
Submerged Surfaces of Steel Water Storage Tanks (par. 2.3.19)
i)
NACE RPO388-95, Impressed Current Cathodic Protection of
Internal Submerged Surfaces of Steel Water Tanks (par. 2.3.20)
j)
NAVFACENGCOM Guide Specification, Section 02090: Removal
and Disposal of Lead-Containing Paint (par. 2.4.3.3)
162
Previous Page
