15.
Hartung, R.F., An Assessment of Current Capability for Computer Analysis
of Shell Programs, Technical Report AFFDL-TR-71-54, Air -Force Flight
Dynamics Laboratory, Wright-Patterson Air Force Base, Ohio, April 1971.
16.
Jessop, H.T., and Harris, F.C., Photoelasticity, Principles & Methods,
Dover Publications, Inc., New York, 1960.
17.
Durelli, A.J., Phillips, E.A., TSAO, C.H., Introduction to the
Theoretical and Experimental Analysis of Stress and Strain, Mcgraw-Hill
Book Company, Inc., New York, 1958.
18.
Lee, G.H., An Introduction to Experimental Stress Analysis, John Wiley &
Sons, Inc., 1958.
19.
Hetenyi, M., Handbook of Experimental Stress Analysis, John Wiley &
Sons, Inc., 1950.
20.
Perry, C.C., and Lisner, H.R., The Strain Gage Primer, Mcgraw-Hill Book
Co., Inc., New York.
21.
Holister, G.S., Experimental Stress Analysis, Principles and Methods,
Cambridge University Press.
22.
Dally, J.W., and Riley, W.F., Experimental Stress Analysis, Mcgraw-Hill
Book Co., Inc., New York.
23.
Durelli, A.J., Applied Stress Analysis, Prentice-Hall, Inc.
24.
Roark, R.J., Formulas for Stress ad Strain, Mcgraw-Hill Book Company,
New York, Fourth Edition, 1965, page 352.
25.
Peterson, R.E., Stress Concentration Design Factors, John Wiley & Sons,
Inc., New York, 1966.
26.
Zick, L.P., Stresses in Large Horizontal Cylindrical Pressure Vessels
on Two Saddle Supports, The Welding Journal Research Supplement,
September 1951; republished with revisions and corrections in Reference
(1.46).
27.
Esztergar, E.P., and Kraus, H., Analysis and Design of Ellipsoidal
Pressure Vessel Heads, Transactions of the ASME, Journal for Industry,
1970; reprinted in Reference (1.46).
28.
Adachi, J., and Benicek, M., Buckling of Tori-spherical Shells Under
Internal Pressure, Experimental Mechanics, 1964; reprinted in Reference
1.46).
29.
Thurston, G.A., and Holston, A.A., Jr., Buckling of Cylindrical Shell
End Closures, NASA Report CR-540, 1966; reprinted in Reference (1.46).
Reference-2
Previous Page
