MIL-HDBK-1027/4A
TABLE 3.3
TRAINER FACILITIES DATA-F/A-18 Secondary Flight Control Trainer
Room dimensions shown are minimums unless noted.
** CAUTION: This document is for preliminary planning only.**
**Verify with NAMTRAGRU Code N5 prior to use. **
REFERENCE DOCUMENTS
Technical Manual F18-NAMT-05 Volume 1, Secondary Flight Controls Trainer,
74D090005-1001 and 74D090005-1003, 74D090005-1005, McDonnell Aircraft.
ARCHITECTURAL
MIN DIMENSIONS
OCCUPANT
30'x 26.5'
10
Device/Trainee Area.
204"x 172"x 78"
(none permanent)
Device Operating Envelope
General Notes: Above requirements are Trainer Device specific.
See other data
for administrative & support spaces.
STRUCTURAL
Device installation transport method: casters
Device shipping weight = 2866 pounds, operating weight = 2701 pounds.
Floor loading in operating configuration with jack pads = 13.4 psi
MECHANICAL
SPACE NAME
TEMPERATURE
HUMIDITY
DEGREES (f)
78
30
Device/Trainee Area
General Note:
Refer to specific device equipment list for loads
87
Previous Page
