UFC 3-260-02
30 June 2001
D 2835-89
Lubricant for Installation of Preformed
Compression Seals in Concrete Pavements
D 2922-81
Density of Soil and Soil-Aggregate In-Place by
Nuclear Methods
D 2937-83
Density of Soil In-Place by the Drive-Cylinder
Method
D 2940
Specification for Graded Aggregate Material for
Bases or Subbases for Highways or Airports
D 3017-78
Moisture Content of Soil and Soil Aggregate In-
Place by Nuclear Methods
D 3202
Recommended Practice for Preparation of
Bituminous Mixture Beam Specimens by
Means of the California Kneading Compactor
D 3405-96
Specifications for Joint Sealants, Hot-Applied, for
Concrete and Asphalt Pavements
D 3406-95
Specifications for Joint Sealants, Hot-Applied,
Elastomeric-Type, for Portland Cement
Concrete Pavements
D 3381-83
Viscosity-Graded Asphalt Cement for Use in
Pavement Construction
D 3515
Specification for Hot-Mixed, Hot-Laid Bituminous
Paving Mixtures
D 3569-95
Specifications for Joint Sealants, Hot-Applied,
Elastomeric, Jet-Fuel-Resistant-Type for
Portland Cement Concrete Pavements
D 3581-96
Specifications for Joint Sealants, Hot-Applied,
Elastomeric, Jet-Fuel-Resistant Type for
Portland Cement and Tar-Concrete Pavements
D 5893-96
Specifications for Cold-Applied, Single
Component Chemically Curing Silicon Joint
Sealant for Portland Cement Concrete
Pavement
D 4318-84
Liquid Limit, Plastic Limit, and Plasticity Index of
Soils
D 4429-84
Bearing Ratio of Soils in Place
A-7
Previous Page
