MIL-HDBK-1110
Page
2.3.5
Coal-Tar Epoxy Coatings..................... 18
2.3.6
Polyurethane Coatings....................... 18
2.3.7
Polyester Coating........................... 19
2.3.8
Inorganic Zinc Coatings..................... 19
2.3.9
Zinc-Rich Organic Coatings.................. 20
2.4
Coating Compatibility....................... 20
2.4.1
Bleeding.................................... 21
2.4.2
Disbonding of Old Paint..................... 21
2.4.3
Topcoat Checking............................ 21
2.4.4
Poor Adhesion of Latex Topcoats to Enamels.. 21
2.4.5
Oil-Based Paints Applied to Alkaline
Surfaces.................................... 21
3.1
Introduction................................ 23
3.2
Material Composition Issues................. 23
3.2.1
VOC Restrictions............................ 23
3.2.1.1
Definition of VOC........................... 23
3.2.1.2
Types of Regulations........................ 23
3.2.1.3
Effect on Coatings.......................... 24
3.2.2
Application Issues.......................... 25
3.2.3
Toxic Solvents.............................. 25
3.2.4
Hazardous Air Pollutants.................... 26
3.2.5
Binders - Polyurethanes, Coal Tars, Asphalts 26
3.2.6
Heavy Metal-Containing Pigments and
Additives................................... 26
3.3
Issues Affecting Surface Preparation........ 28
3.3.1
Regulations................................. 28
3.3.2
Waste....................................... 29
3.4
Surfaces Coated With Leaded Paint........... 29
3.4.1
Background.................................. 29
3.4.1.1
Use of Lead in Paint........................ 29
3.4.1.2
Effects of Lead Exposure on Health.......... 30
3.4.1.3
Environmental Issues........................ 30
3.4.1.4
Occupational Safety Issues.................. 30
3.4.2
Definitions................................. 31
3.4.3
DOD Policy/Instruction...................... 31
3.4.3.1
Residential Structures...................... 31
3.4.3.2
Non-Residential............................. 32
3.4.4
General Description of Lead-Based Paint
Procedures.................................. 33
3.4.4.1
Inspection/Assessment....................... 33
3.4.4.2
In-Place Management (IPM)................... 33
3.4.4.3
Removal..................................... 34
3.4.4.4
Operations and Maintenance.................. 34
3.4.5
Waste Disposal.............................. 35
3.4.6
Demolition of Buildings Containing
Lead-Based Paint............................ 35
3.4.7
Sources of Detailed Information............. 35
vi
Previous Page
