MIL-HDBK-lll0
Page
7.3.2
Thinning...................................103
7.3.3
Tinting....................................103
7.3.4
Straining..................................103
7.4
Weather Conditions Affecting Application
of Paints..................................103
7.4.1
Temperature................................104
7.4.2
Humidity...................................104
7.4.3
Wind.......................................104
7.4.4
Moisture...................................104
7.5
Methods of Application.....................105
7.5.1
Selection of Application Method............105
7.5.2
Brush Application..........................105
7.5.2.1
Procedure for Brush Application............106
7.5.3
Roller Application.........................107
7.5.3.1
Procedures for Roller Application..........108
7.5.4
Spray Application..........................109
7.5.4.1
Conventional or Air Spray Equipment........109
7.5.4.2
Airless Spray..............................115
7.5.4.3
Air-Assisted Airless Spray.................117
7.5.4.4
High-Volume, Low-Pressure Spray............117
7.5.4.5
Multi-Component Spray......................117
7.5.4.6
Electrostatic Spray........................118
7.5.4.7
Powder Spraying............................118
7.5.4.8
Thermal Spraying...........................118
7.5.4.9
Application Technique......................119
8.1
General....................................128
8.2
Background.................................128
8.3
The CSI Format.............................129
8.3.1
General Information Part...................129
8.3.1.1
Summary Section............................130
8.3.1.2
Reference Section..........................130
8.3.1.3
Definition Section.........................131
8.3.1.4
Submittals Section.........................131
8.3.1.5
Quality Assurance Section..................133
8.3.1.6
Delivery, Storage, Handling, and Disposal..133
8.3.1.7
Site Conditions............................134
8.3.2
Products Part..............................134
8.3.3
Execution Part.............................135
8.3.3.1
Work Conditions............................135
8.3.3.2
Surface Preparation........................136
8.3.3.3
Coating Application........................136
8.3.3.4
Inspection.................................136
8.4
Language to be Used in Specification.......137
8.4.1
Concise Words..............................137
8.5
Construction Criteria Base.................138
x
Previous Page
