MIL-HDBK-1027/4A
TABLE 2.2
TRAINER FACILITIES DATA-F/A-18 WTT
Non-motion devices with 2- 40' diameter projection domes
Room dimensions shown are minimums unless noted.
Model facility plates may show site specific larger dimensions.
** CAUTION: This document is for preliminary planning only.**
**Verify with NAWCTSD and NAVAIR prior to use.**
REFERENCE DOCUMENTS
General Requirements for Aviation Training Facilities, NAWCTSD Orlando
TRAINER FACILITY INFORMATION, NAWCTSD Orlando
Trainer Facility Report, F/A-18 WTT TFR, September 1990, Hughes Aircraft Co.
ARCHITECTURAL
SPACE NAME
MIN DIMENSIONS MAX NOISE
ACCESS
REMARKS
(LxWxH)
LEVEL
FLOOR
120'x 65'x 44'
Device/Trainee Area.
55Db(A)
none
2
40'x 23'x 10'
Instructor/Operator
55Db(A)
18" h
23'x 17'x 10'
Debrief Station
35Db(A)
verify
32'x 23'x 10'
Computer Room (CIG)
65Db(A)
18" h 2
46'x 40'x 10'
Computer Room (digital)
65Db(A)
18" h
20'x 10'x 10'
Mech Pump Room (2-ea)
75Db(A)
none
1
General Notes:
Above requirements are WTT specific. See other data for administrative &
support spaces. Equipment noise is indicated on the F/A-18 (WTT) Trainer
Equipment Summary.
Remarks:
1.
Reduce noise to trainee and instructor area.
2.
44' is clear crane hook height. Clear ceiling height is dependent
on crane configuration.
38
Previous Page
