UFC 4-721-10
31 July 2002
CHAPTER 4
THE 1+1E APARTMENT
4-1
The 1+1E APARTMENT. This "enhanced" design provides a larger
bedroom, incorporates added quality of life features in-room, and now
supersedes the smaller original 1+1 Standard Plan. The 1+1E Apartment
consists of two specifically approved plans, the Square Apartment (Figure 4-1)
and the Offset Apartment (Figure 4-2).
4-2
ASSIGNMENT AND USE. Refer to paragraph 1-6 for the proper
assignment use for this design type.
4-3
GROSS BUILDING AREA PER APARTMENT. The Gross
Building Area for the 1+1E Apartment may not exceed:
66 m2 (710 ft2) per module for (1-3 stories)
70 m2 (753.5 ft2) per module for (4 stories and higher). 4 m2 (43.1
ft2) per module may be added to structures that are 4 stories or
higher for the accommodation of structural, mechanical and
electrical requirements.
Gross Building Area for the 1+1E Plan remains unchanged from the original 1+1
Standard, and is unlikely to change in the near future.
4-4
GROSS APARTMENT AREA. The Gross Apartment Area is
approximately:
56 m2 (603 ft2) for both the Offset and the Square plan.
Minor modifications may be made to these plans, but they must be approved by
OPNAV N46. Refer to paragraph 1-8 concerning waivers.
4-5
NET LIVING/SLEEPING AREA: The Net Living/Sleeping Area is
the size of each bedroom. This is a fixed minimum.
14.4 m2 (155 ft2) per bedroom.
4-6
FEATURES: Each Apartment plan includes two single occupancy
bedrooms (each with two personal closets for each resident), an in-suite
bathroom, laundry area, and compact kitchen area.
Bedroom area of 14.4 m2 (155 ft2) is a fixed minimum. Room
dimensions are NOT fixed, but must remain functional. Bedrooms
must be sized to accommodate two twin beds.
Kitchen, Bath, and Closet features are fixed, but layouts and sizes
4-1
Previous Page
