MIL-HDBK-1027/4A
Visitor Control. Locate the checkpoint at the primary pedestrian
entrance to the facility adjacent to the lobby and near administrative areas
with a visitor control security checkpoint. Include a recessed scuff area at
the entry point for control of debris from foot traffic. A vestibule is
recommended for energy conservation. Provide 42 inch high counter with sign-
in area, intercom system where required, under counter files, lockable
storage, and staff phone. Accommodate number of personnel designated by the
user.
3.2.2.5
Interior Design. NAVFAC DM-14.01, Interior Design, provides
interior design guidance. Provide imaginative and creative use of colors and
furnishings. Design solutions should also be economical and the furnishings
maintainable. Fully integrate interior design with the work of other design
and engineering disciplines at all stages of the facility design process.
Provide only those finish systems which have a proven track record of use and
testing. Selection criteria should balance all factors related to
installation and usage: initial and life cycle costs, ease of maintenance,
comfort, etc. Refer to appropriate tables for suggested interior finishes.
Maintenance training buildings are heavily used. The continued
success of initially achieved design objectives is dependent upon the
longevity of the materials used. Select all interior materials and finishes
on the basis of their durability, safety, and suitability for cleaning
procedures. Corridors, for example, must be designed for transportation of
training aids and devices as well as heavy trainee traffic. Terrazzo
flooring in laboratory settings has proven high resistance to wear and
maintains good appearance.
a) Color. Develop a color plan that is consistent with the
building program. Use color to stimulate positive human physical and
emotional reactions and to enhance the overall functions of the building.
For example, color may be used to direct and orient users to color-keyed
functions on floors. Color selection can also support maintenance
management. As a general rule, fixed building materials (e.g., pavers,
ceramic tile, resilient flooring, ceilings, etc.) should be relatively
neutral. Introduce stronger accent colors on more changeable finishes (e.g.,
paint, wall coverings, carpet, furnishings). This will allow color changes
at minimum cost as areas are refinished in the future.
b) Floors. Training facilities are subject to heavy trainee
in/out pedestrian traffic. Entry points and corridors must withstand heavy
foot traffic. Minimize tracked in dirt by using walk-off mats at entry
points to protect flooring and to reduce maintenance. Provide durable and
easily maintained floors. Consider safety, noise impact, traffic bearing
requirements, chemicals and compounds used on flooring and moisture that
flooring will be subjected to under normal and special conditions. Carpeting
may be used in accordance with Table 2.1, Recommended Finishes, MIL-HDBK-
1001/1, Basic Architectural Requirements, and MIL-HDBK-1008C, Fire Protection
for Facilities Engineering Design and Construction.
c) Ceilings. Metal slat ceiling systems are prohibited, since
they do not allow heat to collect at heat detectors. Value Engineering
reports also show significant implemented savings for acoustical tile
ceilings over metal slat systems. Ceiling systems for corridors which
66
Previous Page
