UFC 1-300-02
23 MARCH 2001
are different and separate from those required for materials and products prior to
installation or application.
3.6.2 Inspection
This paragraph defines the inspections required for installed or completed work. These
inspections are different and separate from those required for materials and products
prior to installation or application.
3.6.3 Manufacturer Field Service
This paragraph covers specific requirements when manufacturers are to provide field
quality control with onsite personnel for instruction or supervision of the installation or
application of their products, or for startup or demonstration.
3.7 ADJUSTING AND CLEANING
This paragraph provides final actions to prepare installed equipment or other completed
work to properly function or perform.
3.8 DEMONSTRATION
This paragraph covers requirements of the installer or manufacturer to demonstrate the
operation and maintenance of equipment to the owner's personnel.
3.9 PROTECTION
This paragraph includes provisions for protecting installed work prior to acceptance of
the project. Protection of surrounding areas and surfaces during application or
installation is included in paragraph PREPARATION. Only statements unique to the
particular section should be included.
3.10 SCHEDULES
This paragraph includes schedules that indicate where to put what or provides other
coordinating data. Schedules are sometimes placed here in the specification section
rather than on the drawings. (Only the format for a schedule would normally be
included in a UFGS.)
A-7
Previous Page
