9
The cost estimate is automatically derived from floor plans developed
through use of the software. MDS is a step-by-step, forward progressing
software. It relies a great deal on good sound decisions being made early
in the design process. Using reliable input, MDS will produce a great deal
of design information in a short time frame. This information is produced in
a logical and sequential manner that is unique to MDS. Therefore, the
Figure 1-3 USARC,
submittal requirements are based on the MDS methodology in terms of
Camp Parks,
what information is submitted at each design phase.
California
1.3.2 MDS is a kit-of-parts-type software program, and contains a wide
variety of predesigned space modules for AR facilities, as well as
information on AR-approved systems, materials, and standards of quality.
The MDS software incorporates the Military Computer-Aided Cost
Estimating System (M-CACES), and is used with the Unified Facilty
Guide Specifications to produce finished design documents and cost
estimates. Many, but not all, AR projects are designed utilizing MDS. This
Guide is intended to support the design of AR projects, whether using
MDS or not, but does not incorporate all information contained in MDS.
Designers of projects not utilizing MDS may wish to request MDS
documents to utilize as references for certain portions of their projects,
such as kitchens.
1.3.3 Along with MDS, AR developed its "USAR Design Process and
Submittal Requirements" document to define its desired design process
and the submittals to be made at each step of the process. All AR projects
should follow the process and submittal requirements, unless otherwise
directed by the Using Service or the Design Agency.
1.4
1.4.1 The Design Guide format is intended to facilitate the development of
Format of the
project requirements and designs by dealing with major criteria on both a
Design Guide
general and specific level.
1.4.2 Chapter 1 provides general information about the Army Reserve,
and its facilities program and process. Chapter 2 provides information and
guidance on overall planning of Army Reserve sites and buildings, with
emphasis on site and building organization, functionality, adjacencies and
esthetics. Chapter 3 contains information and guidance on systems and
materials applicable to all Army Reserve facilities, site design, and the
design of the various buildings large-scale, total building or facility issues.
Chapter 4 contains specific requirements for the design of each type of
typical space in an Army Reserve facility. Additional information is included
in the Appendices.
1.4.3 Illustrations in this Guide represent possible applications of the
criteria and are not intended to be definitive. The Design Agency is
encouraged to be creative throughout the design process. Local
UFC 4-171-05
Previous Page
