UFC 1-300-09N
25 May 2005
Table 10-1 Specification Changes Format
Change
Change Format
Adding a
In the Project Table of Contents: Section 09680, Carpet is added to the Project
Specification
Table of Contents.
This Section accompanies this [Amendment] [Modification].
Note: Add the [Amendment] [Modification] number opposite the Specification
Number at the bottom of each page.
Replacing an
In the Project Table of Contents: Section 09680, Carpet, is deleted and Section
Existing
09680X, Carpet, is added to the Project Table of Contents and accompanies this
Specification
[Amendment] [Modification].
Note: Add the [Amendment] [Modification] number opposite the Specification
Number at the bottom of each page.
Adding
Section 03330 Cast-in Place Architectural Concrete
Paragraphs or
2.1 MATERIALS FOR FORMS
Sub-paragraphs
After this paragraph, add the following:
"2.1.1 Reuse of Forms
Forms may be reused in subsequent parts of the project provided they are
undamaged and continue to meet all specified requirements."
Making Word
SECTION 15330
REFRIGERANT PIPING
Changes
2.1.1.2
Copper Pipe and Fittings:
In the second sentence, delete "bronze" and substitute "galvanized steel".
Omitting
SECTION 15530
BITUMINOUS HOT MIX
PAVEMENT
Paragraphs or
2.2
ASPHALT CEMENT
Sub-paragraphs
Delete this Paragraph in in its entirety and substitute the following:
"2.2
NOT USED"
10-4.2
Drawing Changes.
Use Table 10-2, as a guide in preparing changes to the Drawings.
59