UFC 1-300-09N
25 May 2005
CHAPTER 9 DESIGN-BUILD SUBMITTAL REQUIREMENTS
NOTE: All electronic submittals must be in accordance with UFC 1-300-10N. As a
minimum all final submittals must be in electronic format. The project scope of work
must define any other submittals required in electronic format.
9-1
ARCHITECTURAL SUBMITTALS.
The following submittals are typically required for Design-Build projects. Refer to the
particular RFP for the exact submittal requirements for each project.
9-1.1
Concept Design Submittals.
The Concept Design Submittal is intended to convey the extent of the work in a
preliminary conceptual manner. Drawings are approximately 10% to 15% complete at
this stage. This submittal must include, as a minimum:
9-1.1.1
Basis of Design.
Submit a preliminary version of the Basis of Design addressing all items defined in UFC
3-100-10N and UFC 1-200-01.
9-1.1.2
Drawings.
As a minimum, provide the following drawings:
Floor Plans Provide all floor plans, new and demolition, indicating room
names and basic dimensions.
Building Elevations Provide all building elevations indicating all exterior
materials.
Building Section indicate heights of critical building elements.
9-1.2
Design Development Submittals.
The Design Development Submittal is intended to convey the complete extent of the
work in a preliminary manner. The drawings are typically about 35% to 50% complete at
this stage. This submittal must include, as a minimum:
9-1.2.1
Basis of Design.
Submit a complete Basis of Design addressing all items defined in UFC 3-100-10N and
UFC 1-200-01. Update sustainable design validation/certification information required
in UFGS 01331 of the project RFP.
9-1.2.2
Drawings.
As a minimum, provide the following drawings:
43
Previous Page
