UFC 1-300-09N
25 May 2005
Floor Plans Provide all floor plans, new and demolition, indicating room
names and dimensions.
Building Elevations Provide all building elevations indicating all exterior
materials.
Roof Plan Provide a plan of all roof areas, indicating direction of slope
and method of drainage.
Building Section indicate heights.
Typical Wall Sections Provide sufficient wall section(s) to indicate all
materials and different conditions.
Finish Schedule Indicate all proposed finishes
Furniture Plan.
9-1.2.3
Specifications.
Provide preliminary outline specifications in accordance with Chapter 5.
9-1.2.4
Cost Estimate.
Provide Preliminary cost estimate. See NAVFAC Cost Engineering Policy and
Procedures (www.uscost.net/costengineering).
9-1.2.5
Color Boards.
Provide separate interior and exterior color boards indicating all proposed material and
color selections.
9-1.3
Pre-Final Design Submittals.
The intent of the Pre-Final submittal is to provide a complete set of drawings and
specifications. Specifications may be in an edited, or redlined format. The following are
the minimum required of a Pre-Final submittal:
9-1.3.1
Basis of Design.
Resubmit the Basis of Design. Update information including sustainable design
validation/certification information required in UFGS 01331 of the project RFP.
9-1.3.2
Drawings.
Provide complete construction drawings as described in UFC 3-100-10N.
9-1.3.3
Specifications.
Provide complete specifications in accordance with Chapter 5.
9-1.3.4
Cost Estimate.
44
Previous Page
